HOME > Products > Inkjet print engine > Integlide S Series Specifications

Integlide S Series Specifications

Integlide S3411 Specifications

Inkjet print engine Integlide S3411

Print Direction Downward
Print Type Lineheads inkjet system*1
Print Head Piezo, 300 dpi native resolution, 11 gray levels
Ink Type Oil-based pigment ink
Cyan, Magenta, Yellow, Black
1,000 ml/cartridge
Print Resolution Standard Mode:300 dpi (main scanning direction) × 300 dpi (sub-scanning direction)
Fine Mode:300 dpi (main scanning direction) × 600 dpi (sub-scanning direction)
Data Processing Resolution Standard Mode:300 dpi × 300 dpi, Fine Mode:600 dpi × 600 dpi,
Text smoothing (strong):600 dpi × 600 dpi
Print Speed High speed:30.90 m/min(1,216 ipm)*2, Standard:18.96 m/min(746 ipm)
Printable Area Maximum printable area:Width 310 mm(12 7/32"), Length 2,004 mm(78 29/32")
Supported Protocols TCP/IP, HTTP, HTTPs(TLS), DHCP, ftp, lpr, IPP, SNMP(SNMP v1), Port9100(RAW port), IPv4, IPv6
Supported Operating Systems Windows® 10(64-bit), Windows 11(64-bit)
Interface Ethernet:1000BASE-T
Power Source AC100 V-240 V, 10.0-5.0 A, 50-60 Hz
Power Consumption Max. 1,000 W
When Operating (Active):220 W or less*3
Environmental Requirements Temperature:15 ℃ to 30 ℃ (59 ℉ to 86 ℉) Humidity:40% to 70% RH (non-condensing)
Dimensions Head Unit*4 445 mm(W) × 600 mm(D) × 265 mm(H)
17 17/32"(W) × 23 5/8"(D) × 10 7/16"(H)
Control Unit*4 635 mm(W) × 395 mm(D) × 1,345 mm(H)
25"(W) × 15 9/16"(D) × 52 15/16"(H)
Weight Head Unit*5 Approx. 33 kg(73 Ib)
Control Unit*5 Approx. 46 kg(102 Ib)

Integlide S3211 Specifications

Inkjet print engine Integlide S3211

Print Direction Downward
Print Type Lineheads inkjet system*1
Print Head Piezo, 300 dpi native resolution, 11 gray levels
Ink Type Oil-based pigment ink
Red, Black
1,000 ml/cartridge
Print Resolution Standard Mode:300 dpi (main scanning direction) × 300 dpi (sub-scanning direction)
Fine Mode:300 dpi (main scanning direction) × 600 dpi (sub-scanning direction)
Data Processing Resolution Standard Mode:300 dpi × 300 dpi, Fine Mode:600 dpi × 600 dpi
Text smoothing (strong):600 dpi × 600 dpi
Print Speed High speed:30.90 m/min(1,216 ipm)*2, Standard:18.96 m/min(746 ipm)
Printable Area Maximum printable area:Width 310 mm(12 7/32"), Length 2,004 mm(78 29/32")
Supported Protocols TCP/IP, HTTP, HTTPs(TLS), DHCP, ftp, lpr, IPP, SNMP(SNMP v1), Port9100(RAW port), IPv4, IPv6
Supported Operating Systems Windows® 10(64-bit), Windows 11(64-bit)
Interface Ethernet:1000BASE-T
Power Source AC100 V-240 V, 10.0-5.0 A, 50-60 Hz
Power Consumption Max. 900 W
When Operating (Active):140 W or less*3
Environmental Requirements Temperature:15 ℃ to 30 ℃ (59 ℉ to 86 ℉) Humidity:40% to 70% RH (non-condensing)
Dimensions Head Unit*4 445 mm(W) × 600 mm(D) × 265 mm(H)
17 17/32"(W) × 23 5/8"(D) × 10 7/16"(H)
Control Unit*4 635 mm(W) × 395 mm(D) × 1,345 mm(H)
25"(W) × 15 9/16"(D) × 52 15/16"(H)
Weight Head Unit*5 Approx. 32 kg(71 Ib)
Control Unit*5 Approx. 44 kg(97 Ib)

Consumables

Ink Cartridges

Product Name Compatible models Specifications
Integlide S101
Ink Cartridges
S3411/S3211 Colours:Black/Cyan/Magenta/Yellow
NET 1,000 ml
S3211 Colours:Red
NET 1,000 ml
  • *1:Staggered array of 2 inch print heads.
  • *2:Except for Fine Mode and high density settings.
  • *3:Except for warm-up time.
  • *4:Not including exterior mounting screws.
  • *5:Not including ink in the unit and the cartridges.
  • *The exterior cover finish shown is an example.The conveyor module and the exterior cover for the control unit of the downward print model are not included.
  • Integlide S uses a unique Oil-based pigment ink. It differs from other printers in terms of print finish and storage conditions.
  • Colour ink is consumed for maintenance operations even during monochrome printing.
  • Actual print speed depends on system configuration, data and application.
  • Some printing media may produce a distinctive alcohol odour due to a chemical reaction between the specific ingredients in the media and the ink.
  • Depending on the operating environment, not all functions may be available.
  • The Integlide S uses an inkjet printhead, so white lines may appear on some parts of the printed surface due to dust or other factors. If this does not resolve immediately, clean the printhead.
  • Product specifications are subject to change without notice.
  • The minimum retention period for repair parts required for maintenance service of Integlide S control units, inkjet head units and inks is seven years after the end of production.
  • The products listed in this brochure are specifications for certain regions of the EU.
  • For details on product specifications and restrictions, please CLICK HERE to request for further information.
  • Windows is a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries
  • Other company and product names are registered trademarks or trademarks of their respective companies.

Availability may be limited based upon the geographical location. Please CLICK HERE to request for further information.

Top of this page